Відео

Thanks for sharing! where did you get the brushes?

Wow!! Love it!! I am so excited! Wish me luck!! ordered the side triangles and about to look for paint...it makes me so sad when I see how the plastic came off and kept thinking I have to save to hire someone....thanks for posting this!

OMG glad your ok Hope you get the indicator sorted. 308 looks good I have a low mileage 348 ts love it. take care

This is my all time favourite Ferrari and could even be described as 'affordable' ( compared to other models ) . But the price & availability of some parts does look scary! keep up the good work.

Oh no, I'm so sorry! Don't worry, you'll get there, you're far knowledgeable than most, working on an old school Ferrari or any Ferrari isn't easy, but you got talent! Keep it up!

what brand / model is that black car on the left in 0:11 ? it looks like a nice classic for a daily driver, i like that black color, chrome and these classic forms, looks elegant in somehow.

All super cars! Can't wait for yours to be out there one day :)

When you clean your copper armature you are supposed to clean out the grooves. you get a build up of brush dust

Thanks

Flat pedals are more comfortable and safer

Wow that blue 308 is lovely! All of these gorgeous gems are great!! Glad you had a good time, my man!

Great video, I saw the car at Brooklands Italian car day and it is looking good

WOW!! Congratulations my man!! I know it needs some stuff now, but you've got the main hang of it all! Love this red rose!!! Keep it going!! :)

Hi, may I ask what kind of T screw torx are you using

Great work. The heater fan situation is a bit tricky as the setup for this changed several times. I have an early 1977 car and my heater is only an on off switch no speeds. Yours seems to be an intermediate setup between the later one wire cars and the early ones. I wish I could help with what the wiring looks like. With how far you have the front apart hopefully you can trace the wires back. If I had to guess, the resistor probably lives up near where the heater valve is by the brake booster.

Wonderful work, my man! I love your garage and the wall art of all the classic stuff there, so cool! These garage vibes are the best. And I respect you so much for working on this beast!

My traveller seems to sit too low at the back as if the springs have settled. I'm reluctant to but new springs as I've heard most of what's on the market isn't great quality and would also settle quite quickly. Any suggestions? Maybe lowering blocks like yours?

Excellent project, BUT.........I just don't know why so many UA-camrs have to do the 1000 mph video clips. It's so un- natural and frantic. Thanks a lot.

Great video - the car is looking really good, well done

That car has quite a history, must feel good to have all that rust cut out and fixed.

I know powerful progress will be made! Good luck, and can't wait for that night drive when she's ready to roar down the road again! :)

Best of luck with your awesome project dude! 🚗💨💨

It took you till over the 5 minute mark to actually tell us how you like the bike:)

Once you get around to it, I'd be interested to know how easy it is to change your rear derailleur cable and housing? That's assuming you do your own mechanics? Also wondering as the previous poster how this compares to a road bike. I imagine with slicks in, say, a 32 or 35 there wouldn't be much difference.

Many thanks for your video. I watched your original unboxing plus this with great interest. As someone who also bought a 2nd hand defy as a first foray back into cycling and then ungraded to zonda wheels the parallels were uncanny. Do you have any regrets about going for the revolt gravel over a carbon road bike?

The labor of love that we can put into something that we didn't even realize how much we really needed this car or this project. Cheers mate you're going to do an awesome job. It'll be like driving a new car. I kind of renovated an older car and it looks amazing. I am driving a 1999 Toyota solara Two door it's is. Awesome 🎉🎉

What a beautiful 308!! Can you do a night driving or sitting video with the dash lights and interior lights, such as the dome light on too? I would love those vibes!

A neighbour of mine has a Revolt set up with 30 mm road tyres. Ok, he's younger and fitter, but he flew past me the other day riding it, whilst I was on my road bike. That's the beauty of Gravel, one bike with two sets of wheels could be all you need.

It sounds like you need to replace the fuel filter - might also explain the electrical draw on your led light video. I also didn’t see new gaskets between the isolation plate and the intakes - that might explain a high idle as you may have an air leak. Quite common as the base of those carbs tend to warp with over tightening of the hold down nuts.

i am going to make my parcelshelf from several lengths of fence palings sanded and oiled using the old metal bar to each side to support them should look different, ,alas i have no heater yet

what size is that gravel bike, that seat post looks really high, how tall are you and your inseam?

Thank you so much! I came for the spoiler, but I also learned those triangles can be replaced easily, mine are starting to go

Such a beautiful looking car,Fair play to you 😊

Nice work! I noticed a small dent in the front hood, about 10 inches to the right of your newly installed pop up headlight pod, close to the leading edge. You can see it at 10:40

Nice video, just subed, will be watching with interest as I've a GTB. If you are considering parting with your old spoiler let me know 👍

I am so envious how you have racked up the miles and enjoyed it. My 308 has only 17,000 miles on it and I can't bring myself to put more than a few hundred miles on it every year. Also like the wheels.

Great to see a classic car used well! Your gravel driveway reminds me of working on my car. It seemed to camouflage anything dropped on it! I lost a few bolts and screws on mine!

To make the bumper profile and plan view match the bodywork you need to first take a squeeze cast and use that as a drag template. So if its 'relatively' flat in the middle you'd be adding polyester filler as dictated by the drag template to ensure the bumper has a matching plan and profile relative to the body.

Nice work work. Have to complement you on the ride height and wheel choice, a hint of 288. Seeing other people showing their projects helps others get off their backsides and fix their cars. I stupidly reversed into a steep drive a few days ago and took a few millimeters of fibreglass from my daily driver clam.

Great to meet you Mark. The 308 is looking great, its going to be a very well sorted car when finished with many more miles to enjoy over the next 20 years. Pleased the front bumper worked well and saved some weight at the same time. I believe Eurospares have a used one of those side fans you are missing in stock, they are the same as on a BBi

Subscribed so you wouldn't be at 666 followers

What is optional extra button between GTE button and E-Mode next to gearbox?

Very good, thank you very much!

👍💪👌👏Great fine excellent video!

I got em for my gravel bike. There just wasn’t enough coverage for me, I had to go s different direction.

thanks for that, want to change the oil on my dampers, but didn't know how! god knows when it was last done!

The front part sucks with the two parts.

Hi, I had those in past, if you actully flip those velcro straps that gel part on the strap has contact with the frame that should stop slip.

I've been using these for years. The one drawback is that front fender slipping down. Always be careful to cinch it down extra tight.

Gravel is great for those tracks and trails.